Maitre D'oor : MOUNTING

The Syver-Tech Maitre D'oor can accommodate most sliding door sizes and designs. The majority of installations fall into the examples illustrated below.
Also, please keep in mind:

• Review the options, more than one may apply.
• Extra hardware is provided to cover these installations.
• Minor modifications to brackets may be required.

Mounting Option 1 : Flush Mount (short or long door bracket)

• A section of the upper door trim
  (if applicable) will need to be removed
  to allow the Operator to lay flush against the wall.
  
  
• The Operator will protrude 3" out from the wall. Window treatments may need to be adjusted.
  
  
• The long door bracket is used if the door
  is recessed up to 2 1/2" in from the wall.
  
  
• The door bracket may need to be
  cut back if it interferes with positioning
  the motion sensor.
  
  
• If enough space is available, you may want to consider using the Under Mount
  
  Short Bracket
  
  
  Long Bracket
  

Mounting Option 2 : Under Mount (short or long door bracket)

• Door must be recessed a minimum
  of 1-1/4" in from the wall.
  
  
• Operator may protrude only slightly,
  usually eliminating the need for
  adjustments to window treatments.
  
  
• Door bracket is hidden behind operator.
  
  
• Drive lever is not used.
  
  
• Drive Dog engages directly into
  door bracket.